above 250€ Free Shipping in Germany

  above 600€ Free Shipping in the EU

  Taxfree Shopping outside EU

Aki Lynx 5 Webbing Locker

€134.95 *

Prices incl. VAT plus shipping costs

Immediately available

Total: 134.95 *
  • AK1227
Lighter, stronger and more functional! The Lynx 5 is the new innovative 25 mm all-round... more
Product information "Aki Lynx 5 Webbing Locker"


Lighter, stronger and more functional!
The Lynx 5 is the new innovative 25 mm all-round webbing locker with a double push pin design for quick and easy direct connection to soft releases, anchor slings, softies, pulleys, rigging plates and much more.

The 5th generation of the Lynx slackline weblock is manufactured from a single piece of high-strength aerospace aluminum using modern CNC milling technology. This reduced the total weight to 210 g while at the same time significantly increasing the breaking strength to over 72 kN (MBS 3sigma) in the ISA: 51 test procedure. The Evolve main diverter with a starting diameter of 36 mm, known from the Lynx 4, was retained in the Lynx 5 and made as a hollow design, so an additional rigging point has been created, which can be attached using loops or soft shackles. Compared to the Lynx 4, we have optimized the pretensioning performance, slackline webbing is now noticeably easier to tighten. In addition, we have retained the secure locking of the webbing (as usual from Lynx 4) . The webbing is very well guided by the spacious side plate dimensions.

The Lynx 5 has successfully passed the approval process according to the ISA: 51 standard for highline webbing lockers. The laborious test procedure guarantees a high level of security and quality.

As a further innovative novelty, we have developed the new Aki SlipStop which, in combination with a soft release connection, offers a quick and intuitive solution for securing the loose webbing tail. The 10 g light SlipStop prevents micro slippage and tailwalk very effectively and is easy to install and release.

Please note that the SlipStop is still in the beta test phase in order to gain experience in long-term behavior even under extreme climatic conditions. The SlipStop is included free of charge on the condition that you use it with increased caution under test conditions and that you provide us with feedback on the operational performance.

Related links to "Aki Lynx 5 Webbing Locker"
Manual "Aki Lynx 5 Webbing Locker"
Properties "Aki Lynx 5 Webbing Locker"
Line Width: 24,5 mm - 26 mm
Certification: ISA:51
Material: Aluminium 7075 T651
Material Frontpin: High-Tensile Stainless Steel 17-4 PH
Material Rearpin: High-Tensile Stainless Steel 17-4 PH
Manufacturing Process: CNC Machining
Finish: colored anodized
Maximum Working Load (WLL): 12 kN
Minimum Breaking Strength (MBS): 72 kN
Dimensions: 101 mm x 55 mm x 76 mm
Weight: 210 g
Main Diverter Ø: 36 mm to 20 mm
Frontpin Ø: 11,2 mm
Rear Pin Ø: 11,2 mm
Country Of Manufacture: Germany, Taiwan, China
Read, write and discuss reviews... more
Customer review for "Aki Lynx 5 Webbing Locker"
12 Nov 2021

state of the art

Es hat sich viel getan im WebLock-Design.

Die neue Geometrie erleichtert das Vorspannen tatsächlich deutlich.

Hier sind die Erfahrungen der letzten Jahre und die Erfordernisse der "modernen" Art lange Lines mit Low Tension zu spannen innovativ eingeflossen.

Sehr leicht, stabil und hochwertig verarbeitet, kompakte und gedrungene Form.
Qualität, Optik und Haptik: alles sehr nice.

Der zusätzliche Riggingpunkt ist durch das Evolve-Design des Hauptumlenkers sehr einfach nutzbar. Die eingeführte Schlinge verrutscht durch die kleine Vorwölbung im Inneren unter Spannung nicht leicht nach oben, man braucht keinen Ankerstich.

Up to date bester Doppelpin-WebLock bzgl. Funktion, Gewicht und Produktqualität.

Bonus
Meine Erfahrung mit dem SlipStop in Verbindung mit dem Soft Release Light und Wizard-Band:

Coole Idee, einfache und schnelle Handhabung, funktioniert sehr gut und - ich will nicht mehr ohne!
SlipStop kills the MicroSlip :-)

5 Nov 2021

rundum zufriedenstellend

Bin sehr begeistert!
Vorteile wie der RiggingPoint im Diverter, die Softrelease-anbindung, die gute Bandführung oder das Design waren ja von vornherein offensichtlich - und haben auch im nachhinein überzeugt.
Etwas skeptisch war ich was die vorspannbarkeit und den Slipstop angeht. Erstere ist m.e. ziemlich gut, selbst mit Nylontubes oder Sonic2 - ich nutze regelmäßig auch den Lynx4, der unterschied ist himmelweit.
Der Slipstop scheint seinen Job zu machen: habe ihn in diversen Freestyle-Setups als auch größeren Lines (150/170m) mit rutschigem neuen PE-band und Böen bis 60km/h getestet und konnte bisher kein MicroSlippage verzeichnen.

Write an review
Reviews will be activated after verification.

The fields marked with * are required.